Shaoxing Jinqiang Fire Fighting Equipment Co.,ltd.
Shaoxing Jinqiang Fire Fighting Equipment Co.,ltd.
Add to Cart
Water agent 6 liter fire fighting equipment fire extinguisher used for kitchen
Water Fire Extinguisher:
Cools burning material. Very effective against fires in furniture, fabrics, etc. (including deep seated fires), but can be safely used only in the absence of electricity
Air-pressurized water (APW) cools burning material by absorbing heat from burning material. Effective on class A fires, it has the advantage of being inexpensive, harmless, and relatively easy to clean up. In the United States, APW units contain 2.5 US gal (9.5 l) of water in a tall, stainless steel cylinder. In Europe, they are typically mild steel, lined with polyethylene, painted red, containing 6–9 l (1.6–2.4 US gal) of water.
Water mist (WM) uses a fine misting nozzle to break up a stream of deionized water to the point of not conducting electricity back to the operator. Class A and C rated. It is used widely in hospitals for the reason that, unlike other clean-agent suppressants, it is harmless and non-contaminant. These extinguishers come in Template:Vonert units, painted white in the United States and red in Europe.
How to use:
1. Pull the Pin at the top of the extinguisher. The pin releases a locking mechanism and will allow you to discharge the extinguisher.
2. Aim at the base of the fire, not the flames. This is important - in order to put out the fire, you must extinguish the fuel.
3. Squeeze the lever slowly. This will release the extinguishing agent in the extinguisher. If the handle is seleased, the discharge will stop.
4. Sweep from side to side. Using a sweeping motion, move the fire extinguisher back and forth until the fire is completely out. Operate the extinguisher from a safe distance, several feet away, and then move towards the fire once it starts to diminish.
5. Be sure to read the instructions on your fire extinguisher.
1. Body Material:copper&brass,steel,and rubber&plastic
Body Plated:chrome,nickel and so on,or according to your requirement
Body Surface:sand blasting,polishing,or passivation
2. Handle Color:red,yellow,black,blue,green,stainless steel etc
Handle Thickness:1.5mm,1.2mm,and 2.0mm
3. Including Accessories:Safety pin,handle&lever,rivet and rubber rope
CONTACT:
Company: YUYAO JINQIANG FIRE FIGHTING EQUIPMENT FACTORY
Add: Huajia Village,Huangjiabu Town,Yuyao City,Zhejiang Province ,China
website: www.jqfire.com
Sales manager: Amy Fu
Email: jqamyfu@gmail.com
amy@jqfire.com
Tel: 0086-13858403138
